Zebra 10/100 Betriebsanweisung PDF herunterladen (Seite 40)

Getting Started

Assigning an IP Address

Y885775 BradyConnect 10/100 Internal Print Server User Guide 07/18/2008

Assigning an IP Address

Before you can begin working with 10/100 Internal PS, you must get or assign an IP address

for the 10/100 Internal PS device.

There are three different ways to assign an IP address. Here is a list and a brief description of

each method:

• Web View — Browser-enabled method to assign an IP address.

• DHCP — See your LAN administrator for more information.

• Telnet — DOS command to assign an IP address.

With Dynamic Host Configuration Protocol (DHCP)

If your network uses DHCP, your 10/100 Internal PS device is assigned a temporary IP

address.

Without DHCP

If your network does not use a dynamic IP addressing system (such as DHCP), you need to set

a permanent IP address for the 10/100 Internal PS device.

Important • Throughout the procedures in this chapter, there are some features that require the

default User ID and/or default password. If you are prompted, these are the defaults:

• User ID: admin

• Password: 1234

Note • Check with your Network Administrator to see whether your network uses DHCP.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 105 106

Keine Kommentare

Zebra 10/100 Betriebsanweisung Seite 40