Zebra LP 2824-Z Bedienungsanleitung PDF herunterladen (Seite 15)

Contact ImproMed® with any questions. www.impromed.com E-mail: [email protected] Phone: (800) 925-7171

15Suggested Printer Maintenance and Tips

Using the Printer’s Reset Button

The printer’s reset button can restore the printer or network (the internal print server) to factory

default configuration.

By pressing and holding the reset button for one (1) or more seconds, the printer will enter a reset

sequence and the status light will begin blinking every second until released. Releasing the button at

the appropriate time tells the printer which reset function to perform. The table below describes the

reset modes and sequence timing.

Seconds Description

0-1 No Action

1-5 Printer - The printer shall perform a factory default reset. Upon completion of

the factory default reset the printer shall automatically print a configuration

label and a network label (if present).

6-10 Network Option (Internal Print server) - the printer shall drop connection to the

network and a network factory default reset shall occur. Upon completion of the

network default reset the printer shall automatically print a configuration label

and a network label. If no Ethernet is installed in the printer and the printer shall

perform no action if the button is pressed 5 or more seconds.

10 or more Exits the reset factory defaults function without resetting the printer or changing

the printer settings to the factory defaults.

In order to reset the printer and network using the reset button, you must perform two separate reset

actions: a printer reset (press and hold the button 1-5 seconds) and a network reset (press and hold

the button 6-10 seconds). See the Feed Button Modes on page 13 to reset both printer and it’s print

server at the same time using the 4-flash Feed Button mode.

Tip: ImproMed recommends using a paper clip tip to reach the reset buon under the power

buon as displayed in the images above.

1 2 ... 10 11 12 13 14 15

Keine Kommentare

Zebra LP 2824-Z Bedienungsanleitung Seite 15