Zebra RZ400 Betriebsanweisung PDF herunterladen (Seite 92)

Configuration

Standard Control Panel Parameters

79695L-002 Rev. A Z Series

/RZ™ Series User Guide 6/6/08

See next column View Sensor Settings

These parameters are automatically set during the calibration procedure

and should be changed only by a qualified service technician. Refer to the

ZPL II Programming Guide for information on these parameters.

To skip these parameters:

1. Press PLUS (+) to skip each of the following parameters:

ZPL only Select Format Convert

Selects the bitmap scaling factor. The first number is the original dots per

inch (dpi) value; the second, the dpi to which you would like to scale.

Default Value: NONE

Selections: NONE, 150 → 300, 150 → 600, 200 → 600, 300 → 600

To change the value shown:

1. Press SELECT to select the parameter.

2. Press PLUS (+) or MINUS (-) to scroll through the options.

3. Press SELECT to accept any changes and deselect the parameter.

Table 12 • Printer Parameters (Page 24 of 26)

Language/Parameter

Action/Explanation

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 155 156

Keine Kommentare

Zebra RZ400 Betriebsanweisung Seite 92