Zebra ZebraNet RZ Series Spezifikationen PDF herunterladen (Seite 38)

PAX4 Series

Print Engine Installation

P1050133-002 5/31/12

Print Engine Installation

This section provides basic information for mounting the print engine into an applicator. The

illustrations in this section show the print engine from different angles and include dimensions

and clearance needs.

Requirements

Stability When the print engine is mounted, the complete assembly must be physically

stable. When the print engine is loaded with ribbon and media, the equipment must not

become physically unstable.

Ventilation and Temperature Provide ventilation for the print engine mounting enclosure

to remove heat and ensure uninterrupted, trouble-free operation of the print engine. Ambient

air temperature surrounding the print engine must not exceed the following:

• Temperature: 32° to 104°F (0° to 40°C)

• Relative humidity: 20% to 95% non-condensing

Power Requirements Consider the current rating of the print engine during installation.

When power is applied to the print engine and the enclosing equipment, an overload condition

must not be created.

Grounding Requirements Maintain reliable grounding of the print engine. Pay particular

attention to the AC power supply connections so that earth ground is maintained through the

AC power input connector.

Clearance for Cables and Connectors Allow ample space at the rear of the print engine

for electronic connectors and dressing of the following cables: IEC power cord, serial and/or

parallel host communication cable, optional host communication cable (Ethernet), and the

discrete signal (applicator) interface cable.

Power Cord Requirements The IEC power cord does not have a strain relief on the print

engine. If the operating characteristics of the applicator include vibration or strain on the

power cord, provide an appropriate clamping mechanism to avoid unintentional disconnection

of the power cord from the print engine.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 83 84

Keine Kommentare

Zebra ZebraNet RZ Series Spezifikationen Seite 38