Zebra 10/100 Technical Information PDF herunterladen (Seite 43)

Getting Started

Assigning an IP Address

ZebraNet 10/100 Print Server User and Reference Guide 21

4 Telnet to the 10⁄100 PS by typing:

"Telnet xxx.xxx.xxx.xxx"

The password is 1234.

5 When finished, you can alter the appropriate settings. When complete, do a reset

and allow the 10⁄100 PS self test to complete before proceeding with any

communications activity.

*OHDQLQJ7RXVHWKLVPHWKRGFRPSOHWHWKHVHVWHSV

A method by which the 10⁄100 PS uses the IP address of the first ping packet that is

sent to its Hardware address.

1 Add an entry to the ARP table that assigns an IP address to an Ethernet (Hardware)

address.

The syntax for this command is: arp -s "temporary ipaddress of

print server" "MAC Address (print server hardware

address)" arp -s <temporary ip address> <MAC Address>

2 Power cycle the printer.

3 As the printer reboots, begin a continuous ping to the address assigned previously.

Note • The zero (0) placed at the end of the "route add" command is optional on

some systems.

Note • Gleaning works only on local subnets at routers. It does not pass Address

Resolution Protocol (ARP) broadcasts.

Example • You would type: arp -s 10.3.50.59 00-40-68-1D-B9-86

Note • Most UNIX systems use a continuous ping.

To use a continuous ping from a Windows host, you must issue the

command: ping -t "ipaddress".

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 165 166

Keine Kommentare

Zebra 10/100 Technical Information Seite 43