Zebra Wireless Print Server Betriebsanweisung Seite 108
- Seite / 228
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
ZPL Commands for Wireless Operation
^WL
108
14143L-005 Rev. A Wireless User Guide 4/29/08
^WL
Set LEAP Parameters
Description Use this command to enable Cisco
®
Lightweight Extensible Authentication
Protocol (LEAP) mode and set parameters. LEAP is user authentication method that is
available with some wireless radio cards.
Format ^WLa,b,c
The following table identifies the parameters for this format.
Note • The ^WL command is provided only for backward-compatibility with printers using
firmware prior to V50.15.x or X60.15.x. For these firmware versions and later, use ^WX
on page 115 to set the security type and related parameters.
Parameters Details
a =mode Accepted Values: OFF, ON
Default Value: OFF
b =user name Accepted Values: 0 to 32 ASCII characters
Default Value: user
c = password Accepted Values: 0 to 32 ASCII characters
Default Value: password
- ZebraNet 1
- Wireless User Guide 1
- Contents 3
- Section Description 10
- Contacts 11
- Document Conventions 12
- About This Document 13
- Introduction 15
- Hardware 16
- Firmware 16
- Access Point 19
- Technologies 20
- Systems 21
- Supported Security Types 22
- Security Type Supported? 23
- Wireless Plus Print Server 25
- = Active Print Server 25
- Wireless Print Server 25
- Configuration 29
- Any Other Wireless Printer 32
- 7. Click Next 33
- PSK Type to String 34
- PSK Name field 34
- Click OK 35
- To... Then 36
- Save Script to a file 37
- Wireless Radio Card 38
- 5. Turn on (I) the printer 39
- 6. Turn on (I) the printer 41
- Wireless Status 43
- Plus (+) for 105SL 44
- Status Indicator Meaning 44
- SIGNAL STRENGTH and 45
- SIGNAL QUALITY 45
- Network Configuration Label 46
- PAUSE/FEED 47
- Function 48
- WIRED PS CHECK? 48
- ^NP ZPL command 49
- PRIMARY NETWORK 50
- LOAD FROM EXT? 50
- ACTIVE PRINTSRVR 50
- IP PROTOCOL 50
- Parameter 51
- RESET NETWORK 52
- Parameter Explanation 53
- Wireless Status and Settings 55
- Troubleshooting 57
- Wireless Error Messages 58
- General Issues 58
- DEFAULT NET 59
- IP Issues 61
- WebView Web Pages 63
- IP ADDRESS 64
- Home Page 65
- View Printer Configuration 66
- 3. Click Submit Changes 67
- 4. Click on the statement 67
- Network Configuration Menu 69
- Print Listings on Label 69
- Media Setup Calibration 70
- ZPL Control Advanced Setup 71
- Network Configuration Screens 72
- SMTP TCP/IP 74
- X60.15.x and ZSPx 74
- Directory Listing 77
- Click Edit 79
- Button Function/Operation 80
- Alert Setup 81
- Printer Controls 84
- Button Function 85
- Print Server Settings 86
- Print Server: 88
- TCP/IP Configuration 88
- TCP/IP Logical Printing Ports 88
- Cancel Job 90
- View Configuration Sheet 91
- View Port Status Contact 91
- ZPL Commands 93
- Parameters Details 100
- Format ~WL 109
- Region Channel Mask 114
- Configure Wireless Securities 115
- Security Type 03: WEP 128-Bit 119
- Security Type 02: WEP 40-Bit 119
- Security Type 04: EAP-TLS 120
- Security Type 05: EAP-TTLS 120
- Security Type 06: EAP-FAST 120
- Security Type 07: PEAP 121
- Security Type 08: LEAP 121
- Security Type 09: WPA PSK 121
- Security Type 10: WPA EAP-TLS 122
- Security Type 13: WPA PEAP 123
- Security Type 14: WPA LEAP 123
- Security Type 15: Kerberos 123
- SGD Wireless Commands 125
- Overview 126
- Do commands: 127
- Command Structure 128
- Commands Details 129
- Security Type 2: WEP 40-Bit 194
- Security Type 3: WEP 128-Bit 195
- Security Type 4: EAP-TLS 195
- Security Type 5: EAP-TTLS 196
- Security Type 6: EAP-FAST 196
- Security Type 7: PEAP 197
- Security Type 8: LEAP 197
- Security Type 9: WPA PSK 197
- Glossary 217
- © 2008 ZIH Corp 228
Verwandte Produkte und Handbücher für Druckserver Zebra Wireless Print Server
Druckserver Zebra II Spezifikationen
(262 Seiten)
(262 Seiten)
Druckserver Zebra PrintServer Betriebsanweisung
(140 Seiten)
(140 Seiten)
Druckserver Zebra 10/100 Betriebsanweisung
(132 Seiten)
(132 Seiten)
Druckserver Zebra II Spezifikationen
(412 Seiten)
(412 Seiten)
Druckserver Zebra 10/100 Betriebsanweisung
(162 Seiten)
(162 Seiten)
Druckserver Zebra PrintServer Bedienungsanleitung
(157 Seiten)
(157 Seiten)
Druckserver Zebra Net ZM400TM Bedienungsanleitung
(130 Seiten)
(130 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern