Zebra II Spezifikationen PDF herunterladen (Seite 143)

^GB

Graphic Box

Description: The ^GB command is used to draw boxes and/or lines as part of a label

format. Boxes and lines are use to highlight important information, divide labels into

distinct areas, or just dress up the way the label looks. The same format command is

used for drawing either boxes or lines.

Format:^GBw,h,t,c,r

Parameters:

w = box width (in dots)

Accepted Values: value of t to 32000

Default Value: value used for thickness (t)or1

h = box height (in dots)

Accepted Values: value of t to 32000

Default Value: value used for thickness (t)or1

t = border thickness (in dots)

Accepted Values: 1 to 32000

Default Value: value used for thickness (t)or1

c = line color

Accepted Values: B (black) or W (white)

Default Value: B

r = degree of corner-rounding

Accepted Values: 0 (no rounding) to 8 (heaviest rounding)

Default Value: 0

For the w and h parameters, keep in mind that printers will have a default of 6, 8, 12,

or 24 dots/millimeter. This comes out to 153, 203, 300, or 600 dots per inch. To

determine the values for w and h, calculate the dimensions in millimeters and

multiply by 6, 8, 12, or 24.

If the width and height are not specified, you will get a solid box with its width and

height as specified by value t.

The roundness-index is used to determine a rounding-radius for each box. Formula:

rounding-radius = (rounding-index / 8) * (shorter side / 2)

where the shorter side is the lesser of the width and height (after adjusting for

minimum and default values).

ZPL II Programming Guide Volume One: Command Reference for X.10

135

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 261 262

Keine Kommentare

Zebra II Spezifikationen Seite 143