Zebra MC55A0 Betriebsanweisung PDF herunterladen (Seite 24)

1 - 6 MC55A0/MC55N0 Enterprise Digital Assistant User Guide

Charging the Battery

Charging the Main Battery

Before using the MC55 for the first time, charge the main battery until the amber Charging/Battery Status LED

remains lit (see Table 1-1 on page 1-6 for charge status indications). To charge the MC55, use a cable or a

cradle with the appropriate power supply. For information about the accessories available for the MC55, see

Chapter 5, Accessories.

The MC55 is equipped with a memory backup battery which automatically charges from the fully-charged main

battery. When using the MC55 for the first time, the backup battery requires approximately 40 hours to fully

charge. This is also true any time the backup battery is discharged, which occurs when the main battery is

removed for several hours. The backup battery retains RAM data in memory for at least 15 minutes (at room

temperature) when the MC55’s main battery is removed. When the MC55 reaches a very low battery state, the

combination of main battery and backup battery retains RAM data in memory for at least 48 hours.

For cable and cradle setup and charging procedures refer to the MC55 Integrator Guide.

•

USB Charging Cable

•

Charge Only Cable

•

Single-slot USB Cradle

•

Single-slot Ethernet/Modem/USB Cradle

•

Four-slot Charge Only Cradle.

To charge the main battery:

1. Connect the charging accessory to the appropriate power source.

2. Insert the MC55 into a cradle or attach to a cable. The MC55 begins charging. The Charging/Battery Status

LED blinks amber while charging, then turns solid amber when fully charged. See Table 1-1 for charging

indications.

The 2400 mAh battery fully charges in less than four hours and the 3600 mAh battery charges in less than six

hours.

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page

6-2.

Table 1-1

LED Charge Indicators

Charging/Battery

Status LED

Indication

Off MC55 is not charging.

MC55 is not inserted correctly in the cradle or connected to a power source.

Charger/cradle is not powered.

Slow Blinking Amber

(1 blink every 2 seconds)

MC55 is charging.

Solid Amber Charging complete.

Note: When the battery is initially inserted in the MC55, the amber LED flashes

once if the battery power is low or the battery is not fully inserted.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 183 184

Kommentare zu diesen Handbüchern

Keine Kommentare

Zebra MC55A0 Betriebsanweisung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Handheld-Mobilcomputer Zebra MC55A0