Zebra MC55A0 Betriebsanweisung PDF herunterladen (Seite 25)

Getting Started 1 - 7

Charging Spare Batteries

See Chapter 5, Accessories for information on using accessories to change spare batteries.

Charging Temperature

Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Note that charging is intelligently

controlled by the MC55.

To accomplish this, for small periods of time, the MC55 or accessory alternately enables and disables battery

charging to keep the battery at acceptable temperatures. The MC55 or accessory indicates when charging is

disabled due to abnormal temperatures via its LED. See Table 1-1.

Powering On the MC55

After inserting the battery or when turning the MC55 on for the first time, the splash screen displays for about a

minute as the MC55 initializes its flash file system, then the calibration window appears. Note that these

windows also appear upon cold boot.

Calibrating the Screen

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:

1. Remove the stylus from its holder on the side of the MC55.

2. Carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen.

3. Repeat as the target moves around the screen, then tap the screen to continue.

Checking Battery Status

To check the charge status of the main battery in the MC55, tap > Settings > System > Power to display

the Power window.

To save battery power, tap the Advanced tab and set the MC55 to turn off after a specified number of minutes.

Fast Blinking Amber

(2 blinks/second)

Charging error, e.g.:

•

Temperature is too low or too high.

•

Charging has gone on too long without completion (typically eight hours).

Single Blink Amber (when

Power button pressed)

Battery depleted.

Blinking Amber (when

Power button pressed)

Battery over-temperature condition.

Table 1-1

LED Charge Indicators (Continued)

Charging/Battery

Status LED

Indication

NOTE The Calibration screen can be accessed by pressing Blue key then Backspace key.

NOTE To check battery status, remove the MC55 from any AC power source (cradle, cables, etc.)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 183 184

Keine Kommentare

Zebra MC55A0 Betriebsanweisung Seite 25