Zebra TLP 2844-Z Betriebsanweisung PDF herunterladen (Seite 34)

Printing on Linerless Labels

“Linerless labels” are a special label stock without a backing material or

liner on the adhesive side. The media is wound upon itself with the

adhesive on the back of the label in contact with the face of the label below.

Direct-thermal LP printers can handle linerless labels when modified with a

unique, non-stick platen coated with silicone. Even so, adhesives and

coatings can transfer to the media path including the platen and print head;

this build-up can accumulated dust and debris. Maintaining a clean print

head, media path and platen roller ensures proper operation. See the

“Maintenance” section for cleaning instructions.

Linerless platens suffer wear more quickly than standard platens. Keep a

new platen available as a spare and install it whenever the printer has

significantly poorer performance, print quality or media handling. If

sticking or jamming continues even after cleaning, you must replace the

platen. See the “Maintenance” section for platen replacement instructions.

26 980410-001 Rev. B

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 61 62

Keine Kommentare

Zebra TLP 2844-Z Betriebsanweisung Seite 34