Zebra QL 220 Plus Betriebsanweisung PDF herunterladen (Seite 62)

QL Plus Series User Guide

To terminate the Communications Diagnostics Mode and re-

turn the printer to normal operations:

1. Turn the printer OFF.

2. Wait 5 seconds.

3. Turn the printer ON.

Contacting Technical Support

If the printer fails to print the configuration label, or you en-

counter problems not covered in the Troubleshooting Guide,

contact Zebra Technical Support. Technical Support ad-

dresses and phone numbers for your area can be found in

Appendix D of this manual. You will need to supply the fol-

lowing information:

• Model number and type (e.g. QL 420 Plus)

• Unit serial number (Found on the large label on the back

of the printer, also found in the configuration label print-

out. Refer to Figure 26)

• Product Configuration Code (PCC) (15 digit number found

on the label on the back of the unit)

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 84 85

Keine Kommentare

Zebra QL 220 Plus Betriebsanweisung Seite 62