Zebra ZebraNet Betriebsanweisung PDF herunterladen (Seite 114)

Hardware Troubleshooting

Troubleshooting the 10/100 PS

114

14197L-002 Rev. A ZebraNet

10/100 Internal Print Server 08/27/2007

for ZM400, ZM600, GK420 and GX420/430 User Guide

Troubleshooting the 10/100 PS

Defaulting the 10/100 PS on the ZM400 and ZM600 Printers

To default the 10/100 Internal PS to factory settings using the control panel,

complete these steps:

1. From the control panel, press Setup/Exit two times.

2. Press Plus (+ key) five times.

The control panel will read DEFAULT NET.

3. Press Setup/Exit to save the change.

4. After the printer defaults all settings, the control panel will show PRINTER READY.

Defaulting the 10/100 PS and the GK420 and GX420/430 Printers

To default the 10/100 Internal PS and the printer to factory settings, complete

these steps:

1. Turn on (I) the printer and let it complete its power-up cycle.

2. Press and hold the Feed button until you see four flashes of the LED. After the fourth

LED flash, release the button to default the print server and the printer to factory settings.

Note • Only the ZM400 and ZM600 printers have a control panel. To default the print

server on the G-Series printers, see Defaulting the 10/100 PS and the GK420 and

GX420/430 Printers.

Note • The GK420 and GX420/430 printers default both, the print server and the printer,

to factory default settings.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 135 136

Keine Kommentare

Zebra ZebraNet Betriebsanweisung Seite 114