Zebra ZebraNet Betriebsanweisung PDF herunterladen (Seite 36)

Getting Started

Before You Begin

14197L-002 Rev. A ZebraNet

10/100 Internal Print Server 08/27/2007

for ZM400, ZM600, GK420 and GX420/430 User Guide

Before You Begin

10/100 Internal PS offers many features, but how you access and work with them is dependent

on your environment. Before you begin, you need to get information from the 10/100 Internal

PS configuration label.

Table 4 shows the minimum label widths needed to print a 10/100 Internal PS configuration

label with different DPI printheads.

To print a network configuration label for ZM400 and ZM600 printers with a

10/100 Internal PS, complete these steps:

1. Turn on (I) the printer and let it complete its power-up cycle.

When the POST cycle is complete, press

Setup/Exit to enter the Setup Mode.

2. Scroll through the parameters using the Plus (+ key) until you reach List Network.

3. Press Plus (+ key) to print the network configuration label.

To print the network and printer configuration labels for GK420 and GX420/430

printers with a 10/100 Internal PS, complete these steps:

1. Turn on (I) the printer and let it complete its power-up cycle.

2. Press and hold the Feed button until you see one flash of the LED. After the LED flash,

release the button to print the network and printer configuration labels.

Important • Make sure the printer is turned off (O).

Table 4 • Label Width

DPI Inches MM

600 1.25 31.75

300 2.50 63.50

200 3.69 93.73

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 135 136

Keine Kommentare

Zebra ZebraNet Betriebsanweisung Seite 36