Zebra S4M Bedienungsanleitung PDF herunterladen (Seite 116)

Specifications

Ribbon Specifications

110

13290L-001 Rev. A S4M User Guide 10/21/05

Ribbon Specifications

Ribbon must be wound with the coated side out.

Note • This section applies only to printers that have the Thermal Transfer option installed.

Ribbon Specifications

Ribbon width

(Zebra recommends using ribbon at least as

wide as the media to protect the printhead

from wear.)

Minimum >2 in.* 51 mm*

Maximum 4.3 in. 109 mm

Standard lengths 2:1 media to ribbon roll

ratio

984 ft. 300 m

3:1 media to ribbon roll

ratio

1476 ft. 450 m

Ribbon core inside diameter 1 in. 25.4 mm

* Depending on your application, you may be able to use ribbon narrower than 2 in. (51 mm), as long as the ribbon is wider

than the media being used. To use a narrower ribbon, test the ribbon’s performance with your media to assure that you get the

desired results.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 131 132

Keine Kommentare

Zebra S4M Bedienungsanleitung Seite 116