Zebra LP 2824-Z Bedienungsanleitung PDF herunterladen (Seite 11)

Contact ImproMed® with any questions. www.impromed.com E-mail: [email protected] Phone: (800) 925-7171

11Suggested Printer Maintenance and Tips

Status Light Descriptions

What the Status Light is Telling You

LED Status and Color Printer Status

For a Resolutions,

Refer to Number:

Off Off 1

Solid Green On 2

Solid Amber Stopped 3

Flashing Green Normal Operation 4

Flashing Red Stopped 5

Double Flashing Green Paused 6

Flashing Amber Paused 7

Alternately Flashing Green and Red Needs Service 8

Flashing Red, Red and Green Needs Service 9

Flashing Red, Amber Green

(* - Do NOT reset or turn off power!)

Memory Defragmentation 10*

1) The printer is not receiving power.

9 Have you turned on the printer power?

9 Check power connections from the wall outlet to the power supply, and from the power supply

to the printer. Check the power supply’s power indicatory light.

9 Disconnect the printer from the wall outlet for 30 seconds and then reconnect the printer to the

wall outlet.

2) The printer is on and in an idle state.

9 No action necessary.

3) The printer has failed its power on self test (POST).

9 If this error occurs right after you turn on the printer, contact ImproMed®, Inc for assistance.

When the printer is operating normally, the printer status light will be amber for about 10 seconds

before turning green (solid or blinking).

There is a memory error.

9 If this error occurs after you have been printing, turn the printer power off and on, and then

resume printing.

The printhead needs to cool down.

9 If this error continues, turn the printer power off for five minutes or more, and then turn on. If

the amber light persists, then the printer requires service.

4) The printer is receiving data.

9 As soon as all of the data has been received, the status LED will turn green and the printer will

automatically resume operation.

1 2 ... 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

Zebra LP 2824-Z Bedienungsanleitung Seite 11