Zebra T5206R Bedienungsanleitung PDF herunterladen (Seite 155)

PRINTER CONTROL Submenus

155

Optimize&Reboot

Reclaims flash space from deleted flash files. After pressing ↵ wait for the

printer to reboot.

Print File List

Prints a summary of the files stored in flash memory and several statistics on

File System usage.

Auto Locking

• Disable. The ↵ (ENTER) key must be locked manually.

• Enable. The printer automatically locks the ↵ key five minutes after the

last control panel key press.

The factory default is Disable.

Set Lock Key

Normally, to lock or unlock the printer menu, the ↓ and ↵ keys are pressed at

the same time. The Set Lock Key parameter lets you choose different keys to

lock or unlock the printer menu. You may choose almost any group of keys as

the new lock and unlock keys. You cannot use the ↵ key or any key

combinations which are already used for another function. There is no limit to

how many keys can be selected.

To set the new lock key:

1. Go to the PRINTER CONTROL main menu and select “Set Lock Key.”

2. Press ↵. The display reads, “Select a new lock key.”

3. Press the combination of keys that you want to be the new lock key. Make

sure you press all keys selected at the same time.

4. If the selection is valid, the display will read, “Enter the new lock key

again.” Press the same combination of keys a second time. If the

selection is invalid, the display will read, “Invalid key selection.” Return to

step 2 and start over.

5. If the new lock key combination is entered again correctly, the display will

read, “Lock key has been changed.” If it was entered incorrectly, the

display will read, “Validation failed.” Start over at step 1.

6. After entering the new lock combination successfully, press the PAUSE

key to put the printer back online.

NOTE: The new lock combination will remain even if the printer is powered

off and back on.

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 393 394

Keine Kommentare

Zebra T5206R Bedienungsanleitung Seite 155