Zebra ZP 450 Betriebsanweisung PDF herunterladen (Seite 24)

Getting Started

Printing a Test Label

980546-003 B ZP 450™ User Guide 12/17/07

Printing a Test Label

Before you connect the printer to your computer, make sure that the printer is in proper

working order.

You can do this by printing a configuration label.

1. Make sure the media is properly loaded and the top cover of the printer is closed. Then,

turn the printer power on if you have not already done so. If the printer initializes with the

status light blinking green (pause mode), press the Feed button once to set the printer in

Ready (to print) mode. See the What the Status Light is Telling You on page 45 if the

printer’s status light does not turn solid green (Ready).

2. Press the Feed button two to three times to allow the printer to calibrate the printer for the

installed media. The printer may feed several labels during this process.

3. When the status light is solid green, press and hold the Feed button until the status light

flashes once. Release the Feed button. A configuration label will print. If you cannot get

this label to print, refer to Getting Started on page 7.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 69 70

Keine Kommentare

Zebra ZP 450 Betriebsanweisung Seite 24