Zebra ZP 450 Betriebsanweisung PDF herunterladen (Seite 46)

Maintenance

Cleaning

980546-003 B ZP 450™ User Guide 12/17/07

Printhead Cleaning

Always use a new cleaning pen on the printhead (an old pen carries contaminants from its

previous uses that may damage the printhead).

When you load new media, you can also clean the printhead.

1. Rub the cleaning pen across the dark area of the printhead. Clean from the middle to the

outside. This will move adhesive transferred from the edges of media to the printhead

outside of media path.

2. Wait one minute before closing the printer.

Caution • Adhesives and coatings of media can over time transfer onto the printer

components along the media path including the platen and printhead. This build-up can

accumulate dust and debris. Failure to clean the printhead, media path and platen roller

could result in inadvertent loss of labels, label jams and possible damage to the printer.

Important • Using too much alcohol can result in contamination of the electronic components

requiring a much longer drying time before the printer will function properly.

Caution • The printhead becomes hot while printing. To protect from damaging the

printhead and risk of personal injury, avoid touching the printhead. Use only the cleaning pen

to perform maintenance.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 69 70

Keine Kommentare

Zebra ZP 450 Betriebsanweisung Seite 46