Zebra ZXP Series 7 Bedienungsanleitung PDF herunterladen (Seite 53)

4: Printer Settings and Adjustments

Printer Properties

P1058486-002 Zebra ZXP Series 3 Card Printer User’s Manual 49

Tools

Dialog box for testing and communicating with the printer.

• Command to send to printer - Enter a printer command (all capitals without the leading

escape character) in the top edit box; e.g., MI MO, which will pick and eject one card.

Then click on the Execute button. Printer Status will show the status of the command.

Contact Zebra Technical Support for a complete list of the printer commands.

• Print test card - Select the desired test card type from the dropdown menu: Standard,

Printer Parameters, and Encoder Parameters. Click on the Print button to print the

selected test card.

• Cleaning - Select the desired cleaning to be performed from the dropdown menu: Printer

only or Magnetic encoder. Click on the Clean button to run the cleaning process.

• Offset setting - Enter the Front and Back X and Y direction offsets, and click on the

Set Offsets button to set the offsets for printing the card.

• Firmware download: see Page 50 for details.

• Send file - This command will allow a .prn or .txt file to print.

- The .prn file must be created with a Zebra printer driver using the same ribbon as

present in the printer.

- The .txt file must contain firmware commands only with only one command per line.

The first line must only contain MASTER; the last line must only contain SLAVE.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 133 134

Keine Kommentare

Zebra ZXP Series 7 Bedienungsanleitung Seite 53