Zebra ZXP Series 7 Bedienungsanleitung PDF herunterladen (Seite 75)

5: Cleaning

Cleaning the Printhead

P1058486-002 Zebra ZXP Series 3 Card Printer User’s Manual 71

Cleaning the Printhead

Use of the cleaning cards will normally do an adequate job of cleaning the printer. However, a

separate Printhead cleaning, using swabs, can remove more stubborn deposits when print

anomalies persist. To avoid deposits, only use foam-tipped swabs.

Step 1. Place the printer power switch in the OFF (O) position.

Step 2. Open the printer lid by pressing the cover release button, and open the cover fully to

reveal the Printhead mounted on the inside of the cover.

Step 3. Clean the Printhead by moving an alcohol-moistened swab tip side-to-side across the

Printhead elements. Only use moderate force.

Step 4. Allow two to three minutes for the printhead to dry before placing the printer power

switch in the ON ( | ) position.

Step 5. To reorder swabs, refer to the Media List on the Windows Drivers and User

Documentation CD supplied with this printer.

Caution • Never use a sharp object to scrape deposits from the printhead. Permanent

damage to the printhead will result

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 133 134

Keine Kommentare

Zebra ZXP Series 7 Bedienungsanleitung Seite 75