Zebra 96XiIII Plus Spezifikationen PDF herunterladen (Seite 4)

Warnings

Installation

CAUTION: To ensure that the XiIII-Series printer

has proper cooling, do not place any padding or

cushioning material under the unit or next to the

back of the unit.

Use of Shielded Data Cables

CAUTION: Zebra printers comply with

international regulations governing radiated

emissions when using fully shielded data cables.

Data cables must be fully shielded and fitted with

metal or metalized connector shells. Shielded data

cables and connectors are required to prevent

radiation and reception of electrical noise. Use of

unshielded data cables may increase radiated

emissions above the regulated limits.

Setting Printhead Resistance

Value

CAUTION: Do Not Change This Setting —Itis

for technician use only after a printhead

replacement. When configuring the printer, press

NEXT to move past this parameter.

Ribbons and Printhead Wear

CAUTION: For thermal transfer print mode, load

ribbon before performing CALIBRATION. Do

not load ribbon if the printer is to be used in the

direct thermal mode. Ribbons used in the

XiIII-Series printers must be as wide as or wider

than the media. Zebra ribbons provide an

extremely smooth backing surface that protects

the printhead from abrasion by the media. If the

ribbon is narrower than the media, areas of the

printhead will be unprotected and subject to

premature wear.

Repacking

CAUTION: If shipment of your XiIII-Series

printer is necessary, carefully pack the printer in a

suitable container to avoid damage during transit.

Remove any ribbon and paper rolls from the

supply spools, otherwise DAMAGE to the printer

could result. Whenever possible, use the original

container and packaging materials from the

factory. If using a different container, enclose the

unit in a protective, dust-proof bag and ensure that

the unit floats in an outer carton of

shock-absorbing material. Do not package the

printer in a rigid container without utilizing shock

mounts or shock-absorbing packing material. A

rigid container will allow shock on the outside to

be transmitted undamped to the unit, which may

cause damage. A Return Materials Authorization

(RMA) number is required for all equipment being

returned. Contact Zebra Technologies

Corporation’s Technical Support Department to

obtain an RMA number. Equipment returned for

service without prior authorization may be

refused.

76 English

E:\jobs\EH91 Zebra\XiIII\XiIII-gb.vp

Wednesday, December 15, 1999 8:55:26 AM

Color profile: Disabled

Composite Default screen

1 2 3 4 5 6 7 8 9 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Zebra 96XiIII Plus Spezifikationen Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Etikettendrucker Zebra 96XiIII Plus