Zebra 96XiIII Plus Spezifikationen PDF herunterladen (Seite 7)

Media and Ribbon Loading

Media Loading

Roll Media Loading in Tear-Off

Mode (Figure 6-A)

1. Place the Media Roll (Figure 5-E) on the

Media Hanger (Figure 5-F) or optional Supply

Spindle.

2. Open the printhead by moving the lever located

on the Upper Printhead Assembly to the open

(Figure 5-A) position.

3. Loosen the Media Guide (Figure 5-M)

Thumbscrew and position the Guide as far out

from the printer frame as possible.

4. Thread the media under the Dancer Arm

Assembly (Figure 5-P), under the Lower

Roller (Figure 5-L), between the upper media

guide plate and main media guide, under the

printhead, and over the Platen (Figure 5-J).

5. Adjust the Media Guide (Figure 5-M) position

until it just touches the outer edge of the media

without causing it to buckle, make sure it is

parallel to the edge of the media, then tighten

the thumbscrew.

6. Close the printhead by moving the lever

located on the Upper Printhead Assembly to

the closed (Figure 5-B) position.

7. IMPORTANT: Perform the Media Sensor

Position Adjustments found on page 89.

English 79

GB

Figure 5

E:\jobs\EH91 Zebra\XiIII\XiIII-gb.vp

Wednesday, December 15, 1999 8:55:39 AM

Color profile: Disabled

Composite Default screen

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare