Zebra T402 Betriebsanweisung PDF herunterladen (Seite 52)

Label/Tag Specifications

Label/Tag Width 1.12” to 4.65” (28 mm to 118 mm)

Label/Tag Length

0.38” to 22” (10 mm to 559 mm) with standard memory

0.5” (13 mm) to 22” (559 mm) in peel-off mode

Interlabel Gap

0.08” to 0.16” (2 mm to 4 mm)

Recommended: 0.118” (3 mm)

Label/Tag Thickness .003” to .0075” (.08 mm to .19 mm)

Label

Roll

Size

Max. Outer

Diameter

5” (127 mm)

Inner Core

1” (25.4 mm)

Media Requirements

Use Zebra-brand thermal transfer media that is outside

wound. Media may be reflective (black mark) sensing

or transmissive sensing, die-cut, notched, or

continuous.

For die-cut labels, use only full auto dies.

Notched media must have a 0.5” (13 mm) wide x

0.094” (2.4 mm) long cutout located in the center of

the roll. The reflective media black marks must be

located in the center of the roll.

Minimum Black Mark Dimensions:

ü Mark width: 0.5” (13 mm) centered and perpendicular

to the edge of the media.

Mark length: 0.094” (2.4 mm) parallel to the bottom of

the media.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Keine Kommentare

Zebra T402 Betriebsanweisung Seite 52