Zebra ZE500 Betriebsanweisung PDF herunterladen (Seite 56)

Printer Setup and Operation

Select a Data Communication Interface

P1051584-002 8/23/12

Caution • Ensure that the print engine power is off (O) before connecting data

communications cables. Connecting a data communications cable while the power is on (

may damage the print engine.

Table 4 • Data Communication Interfaces

Interface

Standard or

Option

Description

RS-232 Serial Standard Limitations and Requirements

• Maximum cable length of 50 ft (15.24 m).

• You may need to change print engine parameters to match the

host computer.

• You need to use a null-modem adaptor to connect to the print

engine if using a standard modem cable.

Connections and Configuration The baud rate, number of

data and stop bits, the parity, and the XON/XOFF or DTR control

must match those of the host computer.

USB Standard Limitations and Requirements

• Maximum cable length of 16.4 ft (5 m).

• No print engine parameter changes required to match the host

computer.

Connections and Configuration No additional

configuration is necessary.

8-bit Parallel data

interface

Standard Limitations and Requirements

• Maximum cable length of 10 ft (3 m).

• Recommended cable length of 6 ft (1.83 m).

• No print engine parameter changes required to match the host

computer.

• A wired or wireless print server (if installed) takes up this port

on the print engine.

Connections and Configuration No additional

configuration is necessary.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 169 170

Keine Kommentare

Zebra ZE500 Betriebsanweisung Seite 56