Zebra ZM400 Betriebsanweisung PDF herunterladen (Seite 104)

Frequently Asked Questions

104

47619L-006 Rev. A ZebraNet

10/100 Print Server User Guide 02/01/2011

FAQs

Can the internal ZebraNet 10/100 PS option work on a computer network that is

running both TCP/IP and IPX protocols simultaneously? Yes. The ZebraNet

10/100 PS runs all of its available protocols simultaneously. This means that the ZebraNet

10/100 PS can run on mixed networks such as a network using Microsoft, and UNIX.

Will the ZebraNet 10/100 PS allow connectivity to anything other than a PC

network? Yes. The ZebraNet 10/100 PS allows connectivity to systems such as IBM’s

AS400, provided that it is configured using TCP/IP. Other network protocols can be used with

third-party adapters that are converted to 10BASE-T or 100BASE-T.

What if a print job makes it to the queue, but never leaves the queue? The label

does not print. These are the things to check:

• Confirm that the printer is turned on and receiving power.

• Confirm that the network cable is plugged in and that you can ping the printer.

• If the above bullets do not change the outcome, it is likely that there was a

misconfiguration while creating the queue. The queue must be recreated verifying the

following:

• Confirm that you use the print server’s valid IP address.

• If you are using a UNIX or AS/400 host, there is an option for the remote queue name.

There is only one valid response to use: PORTLF1.

• If Windows does not have LPR installed, the above required option should be left

blank.

• See the documentation for other operating system specific queue creation.

What are the minimum requirements to network a printer?

• Cat-5 network cable with 10BASE-T or 100BASE-T connectors

• 10/100 PS

•Hub or Switch

• If a hub or switch is NOT used, you need a cross-over cable.

• Workstation running a TCP stack with print services installed.

What is the default User ID and password for the print server?

• The User ID is admin and the password is 1234.

Important • The ZebraNet 10/100 PS does not support IPX, but it can function on networks

that use IPX protocols.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 115 116

Keine Kommentare

Zebra ZM400 Betriebsanweisung Seite 104