Zebra KR403 Spezifikationen PDF herunterladen (Seite 32)

Prototype Receipt

Designing the Prototype Receipt

P1026208-001 Rev. B Software Integrator Guide 10/29/2010

5. Click Finish. Note some other bar codes are more complicated and may include

additional ‘Bar Code Wizard’ screens to completely configure the bar code

parameters. The bar code is now displayed in a ‘picket fence orientation’ in the receipt

layout.

6. Click on the bar code and move to the desired location.

7. Click on the bar code and right click. Select ‘Bar Code Properties’.

8. From the General tab: You can set the bar codes height down to the minimum allowed

for the selected bar code. For best results, do not set the ‘Narrow bar width’ to less

than 2 dots. Do not set the ‘Print bar code as graphic’ check box.

9. From the Check Digit tab: If your selected bar code includes a data ‘Check Digit’, then

this should be set to allow the printer to ‘Auto generate the check digit’.

10. From the ‘Human Readable’ tab: You control how text is displayed with bar code

symbologies that support human readable text.

11. From the ‘Details’ tab: Set the ‘Include quiet zones’ check box. This increases the bar

code object outlines size in the receipt layout to include the symbology’s proscribed

gap between other printed objects that may interfere with scanning a bar code. The

other feature on this page should normally be set in ZPL code and in data delivered to

the printer when the application is deployed.

12. Repeat this process as necessary for all required bar codes.

Add Simple Line Graphics

Adding Rectangles, Lines and Ellipses is simple process. Once these objects have been

added to the prototype design they can easily be manipulated with ZLP to the level of a

single dot.

Figure 3-4 • Bar Code Properties

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 157 158

Keine Kommentare

Zebra KR403 Spezifikationen Seite 32