Zebra KR403 Spezifikationen PDF herunterladen (Seite 44)

Setting Printer Behaviors

Printer Settings - Advanced Setup Tab - Kiosk Settings

P1026208-001 Rev. B Software Integrator Guide 10/29/2010

Printer Settings - Advanced Setup Tab - Kiosk Settings

This tab in the ZD Windows driver control the label’s print area, including print speed and

darkness settings. It can be accessed from ZebraDesigner by opening the ‘File’ pull-down

menu and selecting ‘Printer Settings ...’

The table below shows the basic kiosk driver settings and associated kiosk commands

along with changes from default settings of the printer. The starting kiosk settings are:

Figure 4-6 • Advanced Setup Tab - Kiosk Settings

Command Name Description

^KV

Kiosk Values Controls the number of receipts to be printed

^CN

Cut Now Causes the printer to cut media in kiosk mode only

^CP

Remove Label Causes the printer to clear the presenter

^PN

Present Now Sets the distance the media will extend beyond

the kiosk wall in addition to the 50mm ‘presented’

for receipt removal.

~PL

Present Additional

Length

Adds to the 50mm (min. present distance) and the

^PN. It is intended for use as

^ML

Max. Label Length Sets max. receipt (and image) length

^MMK

Print Mode Enables Kiosk Mode - check the Configuration

Status printout PRINT MODE = KIOSK

^KV

~PL

^PN

^CN

^PN

^CP

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 157 158

Keine Kommentare

Zebra KR403 Spezifikationen Seite 44