Zebra KR403 Spezifikationen PDF herunterladen (Seite 103)

Troubleshooting

Status Light Error Resolutions

12/23/2009 KR403 Integrators Guide P1016701-001

3. The printer has failed its power on self test (POST).

• If this error occurs right after you turn on the printer, contact an authorized reseller for

assistance. When the printer is operating normally, the printer status light will be amber

for about 30 seconds before turning green (solid or blinking).

There is a memory error.

• If this error occurs after you have been printing, turn the printer power off and on, and

then resume printing.

The printhead needs to cool down.

• If this error continues, turn the printer power off for five minutes or more, and then turn

on. If the amber light persists, then the printer requires service.

4. The printer is receiving data.

• As soon as all of the data has been received, the status LED will turn green and the printer

will automatically resume operation.

5. The media is out.

• Follow the instructions for Automated Media Loading on page 39 in the Operations

section, and then press the Feed button to resume printing.

The printhead is open.

• Close the top cover and then press the Feed button to resume printing.

6. The printer is paused.

• Press the Feed button to resume printing.

7. The printhead is over temperature.

• Printing will stop until the printhead cools to an acceptable printing temperature. When it

does, the printer will automatically resume operation.

8. FLASH memory is not programmed.

• Return the printer to an authorized reseller.

9. The printhead or motor has had a critical failure.

• Return the printer to an authorized reseller.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 119 120

Keine Kommentare

Zebra KR403 Spezifikationen Seite 103