Zebra KR403 Spezifikationen PDF herunterladen (Seite 42)

Controls

Feed Button Modes

P1016701-001 KR403 Integrators Guide 12/23/2009

Power On Modes

With the printer power on and top cover closed, press and hold the Feed button for several seconds. The green status light

will flash a number of times in sequence. The explanation at the right (Action) shows what happens when you release the

key after the start specific number of flashes and before the next flash sequence starts. For flash sequences 4-7, the status

light will flash 3-4 times before pausing and starting the next flash sequence.

Status Flash Sequence Action

Configuration Status - Prints a detailed printer configuration status (label) receipt. The

receipt can be used to verify printing, assist printer to computer communication

configuration, maintenance, troubleshooting, and help us with customer care

communications.

Standard Media Calibration - The printer adjusts the media sensors for optimal

performance with the installed media. It also measures and sets the distance between black

marks (receipt length) when the printer is set for black mark media. The printer will feed

one to four receipts.

Note to users familiar other Non-Kiosk ZPL printers: Kiosk printers have the media type

detection disabled to keep the operator from accidently switching media types, e.g. using

POS media (continuous receipt media) when the application requires black mark media for

proper printing.

***

Serial Port Configuration - To reset the communication parameters. Press and release the

Feed button while the LED rapidly flashes amber and green.

For autobaud synchronization: Send the ^XA^XZ command sequence to the printer while

the LED rapidly flashes amber and green. When the printer and host are synchronized, the

LED changes to solid green. NOTE: No receipts will print during autobaud

synchronization.

***

****

Factory Defaults - Resets the printer to the default factory settings and modes. See the

configuration (label) receipt for a list of the primary settings affected by this Feed Mode

option. Other settings are exclusively set, viewed and controlled by programming are also

reset. The printer then performs a standard media calibration.

***

****

Print Width Adjustment - Prints a succession of boxes starting at the minimum print

width and ending in the printer’s maximum print width in 4mm increments. Press the Feed

button once when the printer has reached the desired maximum print width. Note that the

printer driver and applications can override this setting.

***

****

Print Darkness (Density) Adjustment - Prints a succession of bar code simulation

patterns starting at the minimum darkness (print density/heat) and ending in the printer’s

maximum darkness in increments of four (4) using the ZPL darkness setting range values.

Press the Feed button once the pattern is clear and legible. Do not continue to increase the

darkness setting. Bar code line widths may become distorted reducing readability. Note

that the printer driver and applications can override this setting.

***

****

Manual Media Calibration - The printer runs an enhanced version of the Standard Media

Calibration (see above). Manual calibration is recommended whenever you are using pre-

printed media, print on the liner or back side of the media, or if the printer will not

correctly auto calibrate. A graphical profile of the media sensing will print. See Manual

Calibration on page 96 for an example and usage of this feature.

If the Feed button remains pressed after a 7-flash sequence, the printer exits the configuration mode

when the Feed button is released.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare

Zebra KR403 Spezifikationen Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Etikettendrucker Zebra KR403