Zebra KR403 Spezifikationen PDF herunterladen (Seite 86)

Kiosk Hardware Integration Accessories

Accessories Overview

P1016701-001 KR403 Integrators Guide 12/23/2009

Accessories Overview

The KR403 printer has a wide range of accessories designed and tested to work with your

printer. The accessories can be used by themselves, combined with other printer accessories,

or as part of your own unique printer integration design. At the time of this guides release, the

following accessories are available for your printer:

• Nozzle Bezel — A translucent media exit bezel styled after common credit card input

bezels used in ATM (Asynchronous Transfer Mode) machines and other kiosks.

• Shutter Bezel — The shutter bezel is a light weight door designed to prevent the kiosk

user from easily inserting foreign objects into the printer, dust, or block external light

sources from interfering with the printer’s ability to detect when is media exiting the

printer.

• Small Core Media Roll Adapter — Designed to guide the leading edge of receipt into

the input of the media present rollers. Allows the use of media roll inside diameters

less than 25 mm (typically POS media) and increases the operational range of printer

in a given mounting orientation (see Mounting Orientations on page 22).

• Quick-Fit Printer Mounting — A quick printer release mounting system that can be

used with KR403 mounting accessories or with your own design. The service tech can

pull the leaf spring (latch) to unlock the printer and quickly slide it out for easy

replacement or service. the parts can be ordered separately as:

• Quick-Fit Hubs — Flanged hubs and printer mounting screws

• Leaf Spring Retainer — Spring and two M3 x 3 mm screws

• Roll Support — A rugged media roll support bracket designed to provide minimal

friction and self centering of the media roll.

• Media Roll Low Sensor — Optical sensor designed to mount into the Roll Support

accessory or other KR403 printer mounting accessory and plug directly into the rear

of the printer.

• Universal Roll Holder — This versatile mounting accessory supports three roll

positions with the ability to mount it on either side of the printer.

• Printer Mounting Plate (for roll holder mounted below printer) — This mounting

plate assembly is designed to work with the Universal Roll Holder accessory when

the roll is in the Low and Under holder positions. It includes a inertia dampening

spring roller to optimize printer performance when using the large 250 mm diameter

rolls.

• Wall Mount Roll Holder — The wall mount supports a maximum media roll diameter

of 150 mm. The wall mounting bracket attaches at the front of the printer flush to the

kiosk wall.

• Printer Power Supply (70 watts) — This printer accessory has been optimized for use

with thermal printers and in particular your KR403 printer. It has been designed and

tested to meet or exceed most international safety and compliance standards. Please

check for more detailed safety and compliance information for the printer and this

power supply at the Zebra Web site: www.zebra.com

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare

Zebra KR403 Spezifikationen Seite 86

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Etikettendrucker Zebra KR403