Zebra KR403 Spezifikationen PDF herunterladen (Seite 41)

Controls

Feed Button Modes

12/23/2009 KR403 Integrators Guide P1016701-001

Feed Button Modes

Power Off Mode (Communications Diagnostics Mode)

With the printer power off, press and hold the Feed button while you turn on the power. The status light will be Amber.

After approximately one (1) second, the printer will begin a series of flash sequences described below.

Status Flash Sequence Action

Rapid Amber

Flashing

Firmware Download Mode - The printer starts rapidly flashing red to denote entry into

the Firmware Download mode. Releasing the Feed button here will start initializing the

printer for download. The printer is ready to start downloading firmware when the status

light begins to slowly flash between red and green.

Amber

Normal Operations Mode - The printer continues into a normal printer initialization.

Releasing the Feed button here will allow the printer to start normally without firmware

download or operating in communications diagnostics mode.

Green

Communications Diagnostic (Dump) Mode - Release the Feed button immediately after

the printer status light turns green. The printer will print ‘Now in DUMP’ at the top of the

receipt and then advance to the next receipt. After printing the first receipt, the printer will

automatically enter into diagnostic mode in which the printer prints out a literal

representation of all data subsequently received.

To exit the diagnostic mode and resume printing, turn off and then turn on the printer. An

alternate method for exiting the diagnostic mode is to press the Feed button as many times

as it takes to clear the printer’s command buffer and print ‘Out of DUMP’ on the receipt.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 119 120

Keine Kommentare

Zebra KR403 Spezifikationen Seite 41