Zebra CPCL Spezifikationen PDF herunterladen (Seite 420)

100

101

Mobile Printing Systems

CPCL Programming Manual

Section 14

Configuration/

Control

Commands

pg. 14-194

continued

rd.tag.calibrate

Type: setvar

This command sets the RFID programming position through a tag calibration or it restores the

programming position back to the printer default. Before running this command load the printer with RFID

media and close the printhead.

setvar choices

“restore”, “run”

Default N/A

Example 1

Description

This will restore the program position to the printer’s

default program position (label length - 1mm)

Syntax ! U1 setvar “rfid.tag.calibrate” “restore”

Result Program position is set to a label length - 1 mm

Example 2

Description

This will perform a RFID tag calibration then set the

program position to the optimal position

Syntax ! U1 setvar “rfid.tag.calibrate” “run”

Result Program position is set to the optimal position

rd.tag.data

Type: getvar

This command will retrieve data from the RFID tag that is currently above the transponder.

getvar result The current tag’s data (Example 1) or “NO DATA” (Example 2).

Example 1

Description

This will return the current tag’s data. (In this example a tag is

present and its data is “0123456789ABCDEF12345678”)

Syntax ! U1 getvar “rfid.tag.data”

Result “01234567890ABCDEF12345678”

Example 2

Description This message will return when no tag is present

Syntax ! U1 getvar “rfid.tag.data”

Result “NO DATA”

1 2 ... 415 416 417 418 419 420 421 422 423 424 425 ... 496 497

Kommentare zu diesen Handbüchern

Keine Kommentare

Zebra CPCL Spezifikationen Seite 420

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Zebra CPCL