Zebra TTPM3 Spezifikationen PDF herunterladen (Seite 46)

Programming

Command Reference

P1003642-001 TTPM3 Installation and Programming Manual 01/06/2009

Document-Entry Related Commands

This command sets the ticket length if paper without gaps or black marks is used. One step is

0.67mm.

!A 127 sets up a credit car sized ticket length.

!A 0 turns off the function and reverts to gapped ticket stock. This is the default setting.

The mechanics of TTPM3 works with ticket lengths between 54 and 120 mm.

This command ejects, through the rear document entry, any document positioned in the active

position for encoding (or after decoding). See Syntax on page 31 for definition of active/

standby ticket position.

Selects lower rear document-entry and feed the leading document, in the consecutive supply

entry, to active position. If, in the preceding operation, the upper rear document entry has been

engaged, the document in that entry is retracted from the active position.

If no paper is present, the yellow indicator lights up and the printer waits until the operator

insert new paper stock.

See alternative command !L 17 on page 47.

Same function as !L1, but selects upper rear document entry.

See alternative command !L 18 on page 47.

Set ticket length for roll paper

21 41 Hex

33 65 Decimal

Eject through rear document entry

21 45 Hex

33 69 Decimal

!L 1

Select lower rear document entry

21 4C 31 Hex

33 76 49 Decimal

Note • When set up as a dual document entry printer, a “select rear entry” command (!L1,

!L2, !L17 or !L18) must precede the print command (!P). An ACK character is returned if the

command was successful.

Note • ACK/NAK signaling must be enabled (DIP switch no. 6).

!L 2

Select upper rear document entry

21 4C 32 Hex

33 76 50 Decimal

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 111 112

Keine Kommentare

Zebra TTPM3 Spezifikationen Seite 46