Zebra TTPM3 Spezifikationen PDF herunterladen (Seite 80)

Default Parameter Settings

Parameter Reference

P1003642-001 TTPM3 Installation and Programming Manual 01/06/2009

Select what handshaking to use on the serial interface.

Enables / Disables extra handshaking used by TCP/IP option

A long burn time gives darker print. On insensitive paper types you may have to increase the

burn time to get an acceptable print quality.

For the host computer to get status back from the printer, ACK/NAK must be enabled.

2Default

Printer type

1 Min

2Max

!H P 3 1 Standard (One consecutive [lower entry] + handfed-tickets [upper

entry])

!H P 3 2 DCT (Dual Consecutive entries)

!H P 3 3 Card dispenser

!H P 3 4 Fixed length, see parameter 34

!H P 3 5 Black mark mode, see parameter 36

Note • Must not be set to DCT when front loading is used!

0Default

Network enable

0 Min

1Max

!H P 4 0 Network disabled

!H P 4 1 Network enabled

20 Default

Burn time

16 Min

31 Max

!H P 5 27 Sets burn time 27

Caution • A longer burn time put more load on the printhead, so do not use a longer burn

time than required for a clearly legible print. Settings over 27 are not recommended.

1Default

ACK/NAK + error code

0 Min

1Max

!H P 6 0 Silent

!H P 6 1

Enabled

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 111 112

Keine Kommentare

Zebra TTPM3 Spezifikationen Seite 80