Zebra TTPM3 Spezifikationen Seite 84
- Seite / 112
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Default Parameter Settings
Parameter Reference
83
P1003642-001 TTPM3 Installation and Programming Manual 01/06/2009
Attempts are the number of tickets the TTPM3 should attempt to encode when verification
fails. If set to 1, one ticket is encoded and if verification fails the stripe is erased, VOID printer
on the ticket and an error code sent to the system.
Determines how far the ticket should be fed out after the last pixel line is printed.
Determines how far the ticket should be fed from when the sensor before the cutter sees the
trailing edge, and the ticket is being cut. One step is 0.4 mm.
1 means normal bit order, and 0 means reversed bit order for binary encoding of track 1 using
the !B 1 command.
Normal means that a hex nibble 01h is encoded as 0001 (seen from the edge of the ticket that
enters first when feeding in a ticket from the rear entries). Reversed means that the same
nibble is encoded as 1000.
1 means normal bit order, and 0 means reversed bit order for binary encoding of track 2 using
the !B 2 command.
1 means normal bit order, and 0 means reversed bit order for binary encoding of track 3 using
the !B 3 command.
16
3Default
Encoding attemps, No. of tickets
0 Min
10 Max
!H P 16 2 Two tickets will be used before giving up.
Note • See also !F M.
17
50 Default
Beak feed length
1 Min
250 Max
18
22 Default
Cut position (Short tickets)
1 Min
50 Max
19
1Default
Bit order for !B 1
0 Min
1Max
!H P 19 0 Reverses the bit order on track 1.
20
1Default
Bit order for !B 2
0 Min
1Max
21
1Default
Bit order for !B 3
0 Min
1Max
- Zebra® TTPM3 1
- Installation and 1
- Programming Manual 1
- Contents 3
- Document Printing 8
- Magnetic Encoding 8
- Document Handling 8
- Introduction 10
- Contacts 10
- Installation 11
- Installing a Desktop Printer 13
- Output Tray or Nozzle? 15
- Socket: AMP No. 350689-1 17
- Operation 19
- Keyboard 20
- Paper Stock Positioning 21
- Paper Loading 22
- Paper Jam Removal 23
- Self Test 24
- Repeat Fixed Print 24
- TTPM3 Start-up 25
- Power Failure Cleanup 25
- Start-up Synchronization 25
- Normal Operation 26
- Single-ticket Handling 27
- Inserting a Single Ticket 28
- Read and Decode 28
- Encode and Print 29
- Ejecting the Ticket 29
- Programming 31
- Graphics 33
- Bar Codes 34
- Magnetic Codes 34
- Triggering a Printout 35
- Command Acknowledgment 35
- Additional Commands 35
- Ticket Memory 35
- Encode Binary Data on Track 1 36
- System Commands 37
- Document Entry Commands 38
- Print-data Commands 38
- Storage Commands 39
- Command Reference 41
- !Z 20 <CR><LF> 44
- Feed- acceleration and speed 45
- Example • 45
- Error code Error 47
- Print Related Commands 49
- Text Printing 50
- Graphics Printing 51
- Printing Bar Codes 53
- Example 2 • Code 39 example 54
- Example 3 • Code 128 example 54
- Canceling a Ticket 55
- Encoding 57
- Checksum 59
- Reading and Decoding 60
- What Can You Encode? 61
- Font Loading 68
- Logotypes 69
- Ticket Examples 70
- Printing Bold Text 73
- Reversed Text 73
- Text Attributes 74
- Default Parameter Settings 75
- Default Value 76
- Examples 76
- Summary of Parameter Settings 77
- Restore Factory Default 78
- Parameter Reference 79
- Sets burn time 27 80
- Silent 80
- Enabled 80
- Sets 400 steps/second 82
- Sets 4000 steps/second 82
- Sets 1000 steps/second 82
- Error Codes and Status 87
- Reporting 87
- ENQ” (05H), and !S commands 88
- Security Additions 89
- Extended acknowledgement 91
- Maintenance 93
- Fault Finding 94
- Cleaning the Print Head 95
- Firmware 95
- Setup Options 98
- Communications Protocol 98
- Communications Cable 99
- Ticket Base Material 100
- Coating and Preprint 101
- Magnetic Media 101
- Document Stock 102
- Specifications 102
- TTPM3 Accepted Sizes 103
- Equal Distance Between Tabs 104
- Tickets with 45° Cut Corners 105
- Firmware Versions 106
- Firmware History 106
- FW Version TTPM2 TTPM3 106
- FW revision Change 106
Verwandte Produkte und Handbücher für Drucken & Scannen Zebra TTPM3
Drucken & Scannen Zebra 105SL Plus Betriebsanweisung
(180 Seiten)
(180 Seiten)
Drucken & Scannen Zebra EM 220 Spezifikationen
(67 Seiten)
(67 Seiten)
Drucken & Scannen Zebra S-500 Betriebsanweisung
(80 Seiten)
(80 Seiten)
Drucken & Scannen Zebra 105Se Spezifikationen
(110 Seiten)
(110 Seiten)
Drucken & Scannen Zebra RZ Series Betriebsanweisung
(154 Seiten)
(154 Seiten)
Drucken & Scannen Zebra CPCL Spezifikationen
(70 Seiten)
(70 Seiten)
Drucken & Scannen Zebra TTPM2 Spezifikationen
(140 Seiten)
(140 Seiten)
(86 Seiten)
Drucken & Scannen Zebra CPCL Spezifikationen
(497 Seiten)
(497 Seiten)
Drucken & Scannen Zebra GK420t Betriebsanweisung
(22 Seiten)
(22 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.100 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern