Zebra RW SERIES Spezifikationen PDF herunterladen (Seite 102)

RMAN-RWS-001 rev. B • RW Series Replacement Kits • 3-88 •

Section 3: RW Series Conﬁgurator and Repair

Kits

Using The Product Conﬁguration Code

Each RW series Printer has a Product Conguration Code (PCC). When ordering

replacement parts, use the PCC code to determine the features installed on your

printer. Then use the exploded views to determine which kit to order.

Contact Customer Service if you are unsure of the correct part or assembly

number.

Refer to “Factory Repair & Parts Ordering Procedure” for further information on

ordering parts.

Component Replacement Procedures

Follow the kit replacement procedures as detailed in Section 2. Always replace

a component or assembly with the same part number. If you install a part on an

RW series printer different from the originally installed component (e.g. a different

radio assembly or CPU board), you may have to change the conguration status

(PCC code) of the printer. A change in the printer’s conguration status will

require an update to the conguration part number on the serial number label.

Accurate conguration numbers enable service and technical support personnel to

accurately diagnose any problems which may occur with your printer.

If you need to send your printer to the Factory Service Center (FSC), your printer

will be updated as necessary to conform with the Product Conguration Code on

the serial number label.

 Notes:Ifthelabeldoesnotproperlyidentifytheprinter’scurrentconguration,any

changesyouhavemadetotheprinter’scongurationmayberemovedshoulditbe

returned to Zebra.

If you contact Zebra’s technical support staff, you will be asked for your unit’s

congurationnumber.Ifthecongurationnumberyousupplydoesnotcorrespond

to the printer’s actual status, any technical support you receive may not be

accurate.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 113 114

Keine Kommentare

Zebra RW SERIES Spezifikationen Seite 102