Zebra RW SERIES Spezifikationen PDF herunterladen (Seite 45)

• 2-45 • RMAN-RWS-001 rev. B • RW Series Repair Procedures

RW 420 Radio Replacement Kits

Installation Instructions

This kit includes the parts and documentation necessary to install the

following Replacement Kits in the RW 420 model printer.

Kit p/n Description

RK18242-1 Radio, 802.11b (Compact Flash)

RK17393-015 Radio 802.11b (Zebra Value Radio)

RK17393-019 Radio, Bluetooth Kit

RK17393-029 Radio 802.11g Kit

The installation procedure for all of these kits is substantially the same. Read

these instructions thoroughly before attempting to install any of these kits.

The operator must wear a properly grounded ESD strap to perform the following

repair procedure.

Reference Materials

UMAN-RWS RW Series Users’ Guide

Tools Required

#0 or #1 Phillips Head Screw Driver

Cautions

 Thisinstallationmustbeperformedonlybyaqualiedservicetechnician.

Unless otherwise specied:

• Always turn the printer off

• Remove the battery before installing any Replacement Kits.

Remove the Upper Housing

Refer to the procedure for repair kits RK17393-008 and RK18280-1 for more details on

removing the Keypad and Housing Assembly

1. Remove and retain the (6) screws at locations marked “A” securing the Keypad

and Housing to the printer.

2. Remove and retain the D-rings or the sleeves and carrying strap captured

between the Keypad and Housing and the lower housing.

3. Pivot the Keypad and Housing forward.

4. Unplug the Keypad and LCD ex cables from the CPU board.

continued on next page

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 113 114

Keine Kommentare

Zebra RW SERIES Spezifikationen Seite 45