Zebra RW SERIES Spezifikationen PDF herunterladen (Seite 17)

• 2-17 • RMAN-RWS-001 rev. B • RW Series Repair Procedures

4. Remove the two screws securing the CPU Board to the Lower Housing.

5. Unlock the connector J2 and remove the Bar Sense Cable from the CPU Board.

6. Remove the Printer Frame from the Lower Housing. (Refer to the procedure

for RK17393-007 for more details.) Carefully pivot the printer frame out of the

Lower Housing and lift the Media Cover clear of the Lower Housing .

Avoid putting excess strain on the remaining cables connected to the CPU Board.

7. Remove the Platen and Gear from the Media Cover Assembly. (Refer to the

procedure for AK17393-002 for more details)

8. Remove the Bar Sense Cable from the Printer Frame. Carefully peel the Bar

Sense Cable off the bottom of the Printer Frame.

continued on next page

Peel the old Bar Sense

Cable away from the

printer Frame.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 113 114

Keine Kommentare

Zebra RW SERIES Spezifikationen Seite 17