Zebra RW SERIES Spezifikationen PDF herunterladen (Seite 46)

RMAN-RWS-001 rev. B • RW Series Repair Procedures • 2-46 •

Remove the Radio Assembly

1. If your printer has a Bluetooth radio (RK17393-019), detach the antenna card

from the lower housing.

2. Remove the Radio Assembly by removing the (3) screws securing the Bracket,

Radios to the Card Reader Assembly.

If your printer has a Card Reader Assembly installed, unplug the two cables

from the Card Reader Assembly to the Legacy PCB

You must replace the Radio Assembly you have removed with one of the same type in order

for the printer’s regulatory markings to remain in conformance.

Installing the Replacement Radio Assembly

1. If your printer has a Card Reader option, plug the two cables from the card

reader into the J2 and J4 connectors on the replacement Radio Assembly’s

Legacy PCB

External Antenna (supplied on

RK17393-019

Radio Assembly. (Mount-

ing Screws are included.)

If a Card Reader is installed,

plug the two cables into J2 and

J4 on the Radio Assembly.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 113 114

Keine Kommentare

Zebra RW SERIES Spezifikationen Seite 46