Zebra RW SERIES Spezifikationen PDF herunterladen (Seite 30)

RMAN-RWS-001 rev. B • RW Series Repair Procedures • 2-30 •

Removing the Motor

1. Remove the Printer Frame and Media Cover Assembly from the Lower

Housing.

2. Unplug the Motor connector (J6) from the CPU Board

3. Remove the Motor from the Printer Frame by removing its mounting Screw

and twisting the motor mounting ears away from the frame as shown.

Installing the Replacement Motor

1. Insert the Motor’s pinion gear through the hole in the Printer Frame. Mesh it

with the gears on the side of the Printer frame. Rotate the motor into place on

the Printer Frame as shown and secure it with the Screw supplied with the kit.

2. Reassemble the Printer Frame and Media Cover back into the Lower Housing.

3. Secure the Printer Frame to the Lower Housing with (4) Screws as described

by RK17393-007. Ensure that none of the sensor cables or the motor cables

are pinched between the Printer Assembly and the Bottom Cover Prior to

assembly.

Motor p/n BT16073-1

(Included with RK17393-006)

Screw #4-40 x 1/4” Pan Hd. Phillip Nyl.

p/n TH-SJ0803N

(Included with RK17393-006)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 113 114

Keine Kommentare

Zebra RW SERIES Spezifikationen Seite 30